Sub-surface Inspection (Differential and Reflection) Probes
Sub-surface inspection eddy current probes are used to detect sub-surface defects.
| Part Number | Frequency | Diameter | Height | Body |
| 700P07A | 1kHz-100 kHz | 7 (0.28) | 48 (1.89) | Steel |
| 700P11A | 300Hz-100 kHz | 11 (0.44) | 45 (1.77) | Delrin |
| 700P16A | 300Hz-100 kHz | 16 (0.62) | 45 (1.77) | Delrin |
| 700P24A | 80Hz-60 kHz | 24 (0.93) | 58 (2.28) | Delrin |
| 700P32A | 80Hz-30 kHz | 32 (1.25) | 60 (2.36) | Delrin |
| Part Number | Frequency |
| 851P001 | 400Hz - 50kHz |
| Instruments | Part Number | Cable Type |
| Locator 2/2s | 39A005 | 7-way Lemo/4-way Lemo |
| Locator 3s, Phasec 2s/2d | 29A001 | 12-way Lemo/4-way Lemo |
| Vector 22 | 29A001 | 16-way Lemo/4-way Lemo |
This probe is designed to slide over rows of fasteners to detect flaws; it comes with 1.5, 2.5 and 3.5mm shims allowing it to accommodate different fastener sizes.
| Part Number | Frequency |
| 851P002 | 100Hz - 500kHz |
Note: Probe is fitted with 2 Microdot sockets.
| Instruments | Part Number | Cable Type |
| Locator 2/2s | 39A021 | 7-way Lemo/x2 Microdots |
| Locator 3s, Phasec 2s/2d | 33A192 | 12-way Lemo/x2 Microdots |
Designed to detect surface and sub-surface flaws around aircraft fastener holes without removing the fastener, these absolute reflection probes will penetrate several layers of non-ferrous material with good sensitivity.
Note: The probe is fitted with a 4-way Lemo.
Please contact us for information and for our full range of sizes.
| Instruments | Part Number | Cable Type |
| Locator 2/2s | 39A005 | 7-way Lemo/4-way Lemo |
| Locator 3s, Phasec 2s/2d | 33A130 | 12-way Lemo/4-way Lemo |
| Vector 22 | 45005 | 16-way Lemo/4-way Lemo |
