+7 (495) 674 04 71
+7 (495) 674 04 71
10.04.13New Improved USN60 / USN60L!
We are pleased to announce that every USN60 and USN 60L (except Rack Mount version) shipping out of Lewistown, PA is now the redesigned version with new display. Instruments shipping from other locations around the world may still have the older display until stocks are fully depleted.
As a reminder, benefits of this redesign are:
- The new display provides exceptional ability to view in direct sunlight
- Lower power consumption resulting in longer battery life (11 hours)
- Ability to operate at lower temperature (-20°C / -4°F)
- Increased reliability of the instrument with fewer boards & fewer parts.
USN60 and USN60L part numbers remain the same.
The Rack Mount version (USN60 RM) will keep the old display and old main board for a few more months until we get some additional certifications specific to this version.
Please note that the phased-out versions with the non-VGA will be replaced by USN60 and USN60L instruments with VGA output in a few weeks!
The USN60 is still held in very high regard in the NDT industry, and now it’s better than ever!
The USN60L takes the place of the popular USN58L.
08.04.13NDT-Russia — summary
On the 26-28th March was the 12th International Specialised Exhibition for NON-DESTRUCTIVE TESTING AND TECHNICAL DIAGNOSTICS - NDT Russia, which took place in Moscow, SC "Olimpiyskiy". Traditionally the visitors could see the standard equipment line of GE Sensing & Inspection Technologies. However this time special attention could be paid to new technical solutions that have been recently designed by the company-producer, among which is the RotoArray probe for ultrasonic phased array flaw detectors. The RotoArray is a portable, manually operated, phased array, ultrasonic inspection device which can be connected to any suitable phased array flaw detection instrument to allow rapid scanning of a wide variety of materials and components. Well suited for scanning composite and aluminum aerospace components, the RotoArray can provide A,B, & C-scan images that are achieved with the simplicity of a handheld probe and with performance rivaling that of a full immersion C-scan system.
08.04.13Phasec Obsolete!
Dear Customers! As of April 2, 2013 we can no longer accept orders on the above Phasec instruments or kits. The producer GE Sensing & Inspection Technologies has undertaken a development effort to replace the Phasec product family. However, the lack of available parts has forced the producer to stop production of Phasec before replacement unit becomes available. One reason for stop of production is to insure a supply of replacement parts for Phasec repair under warranty. The newly anticipated product, called Mentor EM, will be available for sale mid-summer 2013. Please be assured that all orders in house will be honored and all warranties remain in effect. Sorry for your inconvenience!
14.03.13NDT Russia — 2013
Welcome to visit our booth F 18 at the 12th International Specialised Exhibition
for NON-DESTRUCTIVE TESTING AND TECHNICAL DIAGNOSTICS, which will take place in Moscow, SC "Olimpiyskiy", 26-28 March.
Source: own info
19.02.13Eddy-current flaw detectors Phasec will be phased out starting from 1st April 2013!
The end-of-life for the Phasec product remains as April 1, 2013.
No orders will be accepted after COB March 29, 2013.
All orders in backlog at that time will be completed.
Source: own info
06.02.13New improved USN 60/USN 60L soon!
We are pleased to announce the imminent release of an upgraded USN 60 & USN 60L with a new display and redesigned main board.
Benefits of this redesign are:
- The new display provides exceptional ability to view in direct sunlight
- Lower power consumption resulting in longer battery life (11 hours)
- Ability to operate at lower temperature (-20°C / -4°F)
- Increased reliability of the instrument with fewer boards & fewer parts.
GE Sensing & Inspection Technologies is in the process of ramping up manufacturing and they expect to start shipping instruments with the new display around mid-February 2013.
Source: own info
25.12.122013!
Dear Partners! Merry Christmas and Happy New Year!
20.12.12SCOUT series — a new generation of portable analyzers!
Bently Nevada product line, a GE Measurement & Control business, unveiled SCOUT, an intelligent suite of portable vibration monitoring and analysis instruments. The SCOUT series demonstrates the business’ commitment to providing the oil, gas and power generation industries with fully integrated, single-provider solutions that support all plant condition monitoring needs. The SCOUT series represents the first products resulting from GE’s acquisition of Commtest Instruments in 2011. Commtest is recognized for its leadership and innovation in portable vibration analysis and monitoring instruments.
“At GE’s Bently Nevada, we’re passionate about developing simple, intelligent systems that provide our customers with the information they need to optimize machinery operations and ensure the highest level of productivity and safety,” said Don Marshall, product manager, GE’s Bently Nevada. “The SCOUT series aligns perfectly with our vision to expand our plant-wide monitoring capabilities, enabling us to offer a truly integrated, end-to-end condition monitoring solution to our customers.”
Engineered from the ground up to offer leading-edge reliability, accuracy and usability, the SCOUT series offers the power and convenience of dual- or four-channel measurement and dual-plane balancing to support all plant condition monitoring needs—from route-based data collection to machinery analysis and balancing. SCOUT's combination of accuracy, intuitive operation and unrivaled storage capacity ensures that each analyzer delivers a premium return on investment. Additionally, the SCOUT series features field-proven Ascent® software that can be programmed with thousands of separate machine definitions covering a number of route choices.
From refineries and petrochemical plants to hydroelectric facilities and wind farms, GE’s Bently Nevada provides trusted and proven vibration monitoring equipment and a comprehensive services portfolio to help improve the efficiency, reliability and performance of production assets like turbines, compressors, motors and generators.
07.09.12Heat Treatment 2012
The exhibition "Heat Treatment" will take place in September, 25 - 27, 2012.
Venue: Pavilion 5, Expocentre Fairgrounds, Moscow, Russia.
The organizer: Exhibition Company "Mir-Expo".
Main exhibition sections:
- Industrial furnaces: muffle, vacuum, melting, shaft, chamber, electric
- Induction heating: HDTV production, induction furnaces
- Equipment for chemical - thermal processing: nitration, cementation, etc.
- Quenching equipment, oils and environments
- Laboratory furnaces, drying cabinets
- Tool set for thermal equipment
- Dimensional and surface processing: shape design, sputtering
- Automation of heat - treatment, control systems, quality control, heat engineering measurements
- Energy-saving technologies of thermal production
Source: own info
28.01.12NDT Russia 2012
NDT Russia is the largest international exhibition in Russia, which represents state-of art technologies and developings in industrial spheres, equipment and instruments for nondestructive testing and technical diagnostics.
Go to the official exhibition site!
INDUMOS Ltd. will take part in this exhibition. We invite all the customers to visit our booth.
Source: own info
18.08.11Defectoscopia — 2011
From 6 till 8 September 2011 there will be the exhibition "DEFECTOSCOPIA - 2011".
Place: Ufa, Mendeleev str., 217A
Event organizers: Journal «In the NDT world», exhibition company «BashEXPO»
With collaboration: Bashkirian Association of Experts, ОАО «Gazprom neftehim Salavat»
Business programm of the exhibition will include a one-day seminar at ОАО "Gazprom neftehim Salavat" (Salavat, 5 September 2011).
Besides traditional exposition in the hall there will be organized a special testing zone where the participants will hold the so-called test-drives, so that the visitors will have the possibility to operate th e modern instruments in all testing methods. Test-drives are planned in ultrasonic, eddy current, optical, acustic, magnetic particle and capillar testing methods. Taking part in test-drives is a unique possibility for producers for practical demonstration of the advantages of their equipment to the wide publics.
INDUMOS Ltd. will traditionally take part in the exhibition "Defectoscopia", which is yearly marked by a high organization level and excellent rates of visiting by leading specialists of enterprizes. At our booth 40 we will expose the state-of-art equipment for nondestructive testing from the world leading producer - GE Sensing & Inspection Technologies.
Welcome to our booth!
Source: own info
29.06.11Attention!
You can purchase thickness gauges DM 4E and DM 4 DL from the stock of INDUMOS Ltd. Delivery set includes probes, cables, and cases. The quantity is limited!
Source: own info
02.06.11“TUBE. RUSSIA’ 2011”
This year over 750 companies from over 29 countries took part in the exhibition. Collective expositions, organized with support of national industrial associations were from Belarus, Germany, Switzerland, France, Italy, Spain, China, Taiwan, Chezh republic.
Great attention to the exhibition was paid by Russian enterprises. This year the new solutions of machinery industry were exposed by 450 companies and enterprises.
We express deep gratitude to all the visitors of our booth!
Source: own info
30.03.11“NDT Russia» — 2011”
Special interest of visitors was attracted by ultrasonic thickness gauge DMS-Go – the latest solution with high-end design. The thickness gauge DMS Go has a part of DMS 2 (Krautkramer) features, whereas, having small size and weight, allows the operator to work in hard conditions using one hand only! Simple navigation in Russian menu, and also operator friendly color graphic interface allows to improve the overall testing productivity. Among the advantages of design we could mention joystick, by which the operator makes settings and controls testing parameters. Color display with high resolution allows viewing of full A-scan. Hard protected casing (IP 67) is provided for work in hardest conditions. The thickness gauge is equipped with USB-port for data transfer and also 2Gb memory card (standard set). The spheres of application of thickness gauge DMS Go include, besides standard applications, measurement of wall thickness on testing object. The thickness gauge DMS Go can be upgraded to a flaw detector by the user, for this the latter needs to acquire the necessary software and load it into the gauge by means of SD-card.
High evaluation on the part of visitors was also given to phased array flaw-detector – thickness gauge Phasor XS CV/DM for spot corrosion detection. Among the advantages of Phasor XS CV/DM we should point out the following:
- multi-element probe for corrosion detection, providing continuous line scanning and excellent resolution in subsurface area;
- specially developed software, allowing to achieve maximum productivity of testing in phased array mode;
- excellent casing features: protection class IP 65, weight lower than 4,4 kg, battery with long service life and possibility for charging inside the instrument.
Source: own info
